There are 608 search results.
-
When you want to peel off the glue
The ingredients of the glus become soft when it is exposed to the steam of the hot water boiled in the kettle. Peel it slowly when it becomes soft....
https://www.tombow.com/en/faq/when-you-want-to-peel-off-the-glue-2/
-
How to use PiT Multi
PiT Multi is multipurpose liquid glue that can be used as strong glue before getting dry and a temporary tape when dried.It was released in 1986 as a completely new office adhesive. As it is made of w...
https://www.tombow.com/en/faq/04g/
-
Concept of Tombow
Tombow is at your side, always. If stationery had not been by the side of people, neither verses of famous poems nor the world-changing inventions might have ever been born. If station...
https://www.tombow.com/en/concept/
-
Corporate
About Tombow Company Profile Message from CEO Company Histo...
https://www.tombow.com/en/corporate/
-
What is the replacement cartridge list
...
https://www.tombow.com/en/faq/07c/
-
What is the time limitation of pencils
The barrel and the lead of pencils do not get rotten, but pencil's condition gets worse in extremely dry or humid environment. The better the storage state, the more semi-permanently available. The ol...
https://www.tombow.com/en/faq/08p/
-
How to refill the cartridge
...
https://www.tombow.com/en/faq/09c/
-
What is the replacement cartridge list
...
https://www.tombow.com/en/faq/10e/
-
Why does the written part get dirty after erasing
The theory of pencils is that as the lead touches the surface of paper, its black powder adheres on the paper and remains as handwriting. It is possible to erase the lead powder by erasers, but please...
https://www.tombow.com/en/faq/11p/
-
How to refill the cartridge
...
https://www.tombow.com/en/faq/12e/
-
What is the replacement cartridge list
...
https://www.tombow.com/en/faq/13g/
-
Why is the lead broken
Same as pottery, the lead of a normal pencil is made strong and does not break easily. However, the lead might be broken by a sharpener with deteriorated blade, strong press to the hole of sharpener, ...
https://www.tombow.com/en/faq/14p/
-
How to refill the cartridge
...
https://www.tombow.com/en/faq/15g/
-
What to do when stained by oil-based ink
In the case of skin Please wash it with soap immediatery. It may not remove immediately, but it is washed repeatedly, and it remove gradually by bathing, etc. In the case of paper The ink penetrate...
https://www.tombow.com/en/faq/16b/
-
What to do when stained by water-based ink
In the case of skin Please wash it with soap immediately. It may not remove immediately, but it is washed repeatedly, and it remove gradually by bathing, etc. In the case of paper The ink penetrate...
https://www.tombow.com/en/faq/17b/
-
How to refill ink of marking pens
For Kei Coat marking pens and Kei Coat 80 marking pens, ink can be refilled by Kei Coat Charger....
https://www.tombow.com/en/faq/18m/
-
Why does the part written by colored pencils get whitened
The lead material of colored pencils contains a lot of wax. As the wax part gets pushed out to the surface, the tiny grains from the surface makes the written parts white. It is natural for wax to go ...
https://www.tombow.com/en/faq/19p/
-
How to use the refill ink Kei Coat charger
■ How many time it can refill? One bottle of Kei Coat charger can refill around 10 times. However, considering the life of the marking pens allow them to be refiled 5 times while purchasing pens. ...
https://www.tombow.com/en/faq/20m/
-
What to do when the ink does not come out
■ Is there any ink left? The amount of ink can be seen from outside of the lead, but it may be difficult to see if the lead is made of metal. ■ Ink Life Ballpoint pens have a lifetime of four to ...
https://www.tombow.com/en/faq/21b/
-
How to handle ink leak
■ Ink leak from the tip Try writing freely on paper to see if the ink sometimes gets heavy and light. The tip is made precisely, so be carefully not to drop or bump it, for the tip might get deformed...
https://www.tombow.com/en/faq/22b/
-
Why is the writing line uneven
Ink on the surface of the ball of the tip is transcribed into paper and written. The ink which remains without being transcribed is returned to the chip, but when the tip part is garbage or it is defo...
https://www.tombow.com/en/faq/23b/
-
Why no ink coming out at first
For ballpoint pens, ink on the surface of the ball at the tip of the ball is transferred to the paper and written. If it is not used for a while, the ink dries and it is difficult to rotate the mass, ...
https://www.tombow.com/en/faq/24b/
-
Why does the writing line become multiple
The gap between the ball and the holder of the nib is created uniformly. When the holder is deformed by dropping or beating, and only a part narrows, ink does not get on the surface of the ball and is...
https://www.tombow.com/en/faq/25b/
-
How to write with ballpoint pens
■ For upward writing For ballpoint pens, ink on the surface of the ball at the tip of the ball is transferred to the paper and written. The ink is fed by gravity from the tank (in the pipe). If the p...
https://www.tombow.com/en/faq/26b/
-
How to erase the part written by ballpoint pens
There is a method of turning off the surface of the paper with the ink with the sand eraser etc. There is a method of erasing it by a correction tape etc. The method of decomposing the dye by erasing ...
https://www.tombow.com/en/faq/how-to-erase-the-part-written-by-ballpoint-pens/
-
How to store ballpoint pens
The ink deteriorates when placed at high temperature for a long time. Avoid placing ballpoint pens in places with high temperature and high. Please note that the ink stickiness becomes stronger at lo...
https://www.tombow.com/en/faq/28b/
-
How to handle the pipe on the tip
The pipe tip is an important part to mechanical pencils. Please note that it is not easy to return to the original position once bent....
https://www.tombow.com/en/faq/29s/
-
How much to pull out the lead
Pulling out too much lead is not recommended, because the lead becomes easy to break. ...
https://www.tombow.com/en/faq/30s/
-
How to handle the taper (metal tip)
Note that the taper will lead to a broken lead when loosened....
https://www.tombow.com/en/faq/31s/
-
What direction to knock out the lead
If you knock the mechanical pencil upwards, the lead will come out, but you will not be able to use the tip. The spare lead placed in the barrel uses the refilling mechanism by gravity, so the tip doe...
https://www.tombow.com/en/faq/32s/
-
How long is the durability of mechanical pencils
The durability of the chuck is almost the same as that made of plastic and metal, and it is possible to knock more than 100,000 times. 0.6 mm is pushed out per knock, it becomes possible to use more t...
https://www.tombow.com/en/faq/33s/
-
Why is there no pin attached to mechanical pencils
Lead often got broken in the past because for its firmness, that was why a cleaner pin was attached to remove the leftover of the lead in the barrel. At present, the firmness of the lead has been impr...
https://www.tombow.com/en/faq/35s/